Home
Product Directory
Electrical & Electronics
Telecommunication & Broadcasting
Other Communication Products
Ethernet Over 8E1
| Min. Order: | 2 Pieces |
|---|---|
| Production Capacity: | 500/Week |
| Payment Terms: | L/C, T/T, Western Union, Paypal |
Similar Items
Loading...
You May Like
Loading...
Product Description
Company Info
Product Description
Ethernet Over 8E1 Converter, E1 port support 75ohm or 120ohm, Ethernet port support 10/100M BPS. LAN-WAN connectivity.
Product function: Ethernet Over 8E1 Converter uses reverse multiplexing technology to transmit 10/100BaseT over E1 channels, thus realizing conversion between 1-8 E1 channels and Ethernet interface. It can transmit signals point-to-point from E1 channel to Ethernet to realize connection between E1 channel and Ethernet. Being different from general long-distance bridge, this converter supports flexible configuration of 1 to 8 channels E1 and can detect the number of E1 channel and choose available channel. In the meantime, certain difference of transmitting delay is allowed among E1 channels. Line rate is 1968Kbit/s for one E1 channel and bandwidth can reach 15744Kbit/s for 8 E1 channels. When used in 10/100Mbps half/full duplex mode, this equipment can be connected with Ethernet switch or hub (integrated circuit machine) to expand transmitting distance and application scope of Ethernet by making full use of large number of E1 channels in current telecommunication network. It is an excellent solution for connecting Ethernet broadband. This product can be applied in many fields such as connection of LAN and end offices, video ordering (VOD), remote monitor and E1 interface of switches.
Features:
Realizes transparent transmission of Ethernet data in 1 to 8 E1 channels.
Ethernet supports 10M/100M, full/half duplex auto-negociation, supports VLAN.
Ethernet port supports AUTO-MDIX (cross over and straight through auto-adapt).
Setting CRC alarm limitation to auto isolate lines with low transmitting quality (being cut single-directionally); When error code rate of one direction in 2M branch exceeds the limitation, this direction is cut and the other direction will not be affected, namely the two transmitting directions of Ethernet can be unsymmetrical.
Allow 8 E1 channels up to 10ms transmission delay. When the delay exceeds allowed limit range, it can stop transmitting data automatically.
Has 2 loop back functions: E1 local loop, E1 remote loop.
Supports Dynamic Ethernet MAC address (4096) with local address filter function.
E1 interface compatible with ITU-T G. 703, G. 704, and G. 823. Not supporting signal timeslot.
E1 interface has internal clock recover circuit and HDB3 code/decode circuit.
Supports E1 channel hot plug, and auto detect effective E1 channels data transmission will not be cut.
Supports 1 to 8 E1 channels customized configuration, auto detect the number of E1 channels and select the available E1 when resetting.
Supports resetting remote system from local system.
Having Ethernet monitor auto reset function.
Parameter and specifications
E1 interface
Standard: E1 interface compatible with G. 703 standard.
Rate: 2.048Mbit/s 50ppm
Coding: HDB3
Impedance: 75ohm ( unbalance) or 120ohm (balance)
Connector: BNC (75ohm) or RJ45 (120ohm)
Jitter Performance: According to G. 742 and G. 823
10/100Base-T
Rate: 10M/100M, full/half duplex auto-adapt.
Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN)
MAC address table: 4096 MAC addresses.
Ethernet buffer: 64Mbits SDRAM
Physical interface: RJ45, support AUTO-MDIX (cross over and straight through auto-adapt)
Dimension
19inch rackmount type: 433 mm(L)× 138mm(W)× 44 mm(H)
Operating environment
Voltage: DC-48V, input range: DC-36V~DC-72V
Power Consumption: <=5 Watts
Working temperature: 0C~50C
Storage temperature: -40C~+70C
Humidity: 95%
No causticity and solvent, dust free, and no strong magnetic interference.
Ordering information
BD-8E1-ETH/AC/75 8E1-ETH converter, 75ohm, BNC,
220V, 19 inch, 1U high
BD-8E1-ETH/DC/75 8E1-ETH converter, 75ohm, BNC,
48V, 19 inch, 1U high
BD-8E1-ETH/AC/120 8E1/ETH converter, 120 ohm,
BNC, AC220V; 19 inch, 1U high
BD-8E1-ETH/DC/120 8E1/ETH converter, 120ohm, RJ45, DC-48V;
19 inch, 1U high
Product function: Ethernet Over 8E1 Converter uses reverse multiplexing technology to transmit 10/100BaseT over E1 channels, thus realizing conversion between 1-8 E1 channels and Ethernet interface. It can transmit signals point-to-point from E1 channel to Ethernet to realize connection between E1 channel and Ethernet. Being different from general long-distance bridge, this converter supports flexible configuration of 1 to 8 channels E1 and can detect the number of E1 channel and choose available channel. In the meantime, certain difference of transmitting delay is allowed among E1 channels. Line rate is 1968Kbit/s for one E1 channel and bandwidth can reach 15744Kbit/s for 8 E1 channels. When used in 10/100Mbps half/full duplex mode, this equipment can be connected with Ethernet switch or hub (integrated circuit machine) to expand transmitting distance and application scope of Ethernet by making full use of large number of E1 channels in current telecommunication network. It is an excellent solution for connecting Ethernet broadband. This product can be applied in many fields such as connection of LAN and end offices, video ordering (VOD), remote monitor and E1 interface of switches.
Features:
Realizes transparent transmission of Ethernet data in 1 to 8 E1 channels.
Ethernet supports 10M/100M, full/half duplex auto-negociation, supports VLAN.
Ethernet port supports AUTO-MDIX (cross over and straight through auto-adapt).
Setting CRC alarm limitation to auto isolate lines with low transmitting quality (being cut single-directionally); When error code rate of one direction in 2M branch exceeds the limitation, this direction is cut and the other direction will not be affected, namely the two transmitting directions of Ethernet can be unsymmetrical.
Allow 8 E1 channels up to 10ms transmission delay. When the delay exceeds allowed limit range, it can stop transmitting data automatically.
Has 2 loop back functions: E1 local loop, E1 remote loop.
Supports Dynamic Ethernet MAC address (4096) with local address filter function.
E1 interface compatible with ITU-T G. 703, G. 704, and G. 823. Not supporting signal timeslot.
E1 interface has internal clock recover circuit and HDB3 code/decode circuit.
Supports E1 channel hot plug, and auto detect effective E1 channels data transmission will not be cut.
Supports 1 to 8 E1 channels customized configuration, auto detect the number of E1 channels and select the available E1 when resetting.
Supports resetting remote system from local system.
Having Ethernet monitor auto reset function.
Parameter and specifications
E1 interface
Standard: E1 interface compatible with G. 703 standard.
Rate: 2.048Mbit/s 50ppm
Coding: HDB3
Impedance: 75ohm ( unbalance) or 120ohm (balance)
Connector: BNC (75ohm) or RJ45 (120ohm)
Jitter Performance: According to G. 742 and G. 823
10/100Base-T
Rate: 10M/100M, full/half duplex auto-adapt.
Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN)
MAC address table: 4096 MAC addresses.
Ethernet buffer: 64Mbits SDRAM
Physical interface: RJ45, support AUTO-MDIX (cross over and straight through auto-adapt)
Dimension
19inch rackmount type: 433 mm(L)× 138mm(W)× 44 mm(H)
Operating environment
Voltage: DC-48V, input range: DC-36V~DC-72V
Power Consumption: <=5 Watts
Working temperature: 0C~50C
Storage temperature: -40C~+70C
Humidity: 95%
No causticity and solvent, dust free, and no strong magnetic interference.
Ordering information
BD-8E1-ETH/AC/75 8E1-ETH converter, 75ohm, BNC,
220V, 19 inch, 1U high
BD-8E1-ETH/DC/75 8E1-ETH converter, 75ohm, BNC,
48V, 19 inch, 1U high
BD-8E1-ETH/AC/120 8E1/ETH converter, 120 ohm,
BNC, AC220V; 19 inch, 1U high
BD-8E1-ETH/DC/120 8E1/ETH converter, 120ohm, RJ45, DC-48V;
19 inch, 1U high
Address:
Room 1101, Bulilding 31, Lane 1508, Meijiabang Road, Sonjiang District, Shanghai, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Security & Protection
Company Introduction:
Shanghai Baudcom Communication Device Co., Ltd. is the leading manufactures and exporters from Shanghai, China. It is a high-tech company that specializes in researching, developing, manufacturing and marketing data communication products.
Baudcom products include 10/100M Managed Media Converter, 10/100/1000M Managed Media Converter, 4E1/8E1/16E1 PDH fiber optical Multiplexer, Telephone/Video/Data fiber multiplexer, Digital Vedio audio optical multiplexer, 4/8/16/32channel voice optical multiplexer, E1/V35/RS232 Fiber modems, voic10/100M+V. 35/4E1/RS232/FXO(S) integrated optical transimission multiplexer, 1E1/4E1/8E1 to Ethernet protocol converter, V. 35 to 10/100M converter, E1/V35/Ethernet G. SHDSL modem, TDM over IP, 8/16 channels CWDM platform, SFP modules, SFF transceiver, 1x9 transceiver and so on.
Our company have passed the verification of ISO9001: 2000 and gained the network connection certificate for telecommunication devices issued by the Ministry of Information Industry. All of the Baudcom′s products are strictly parameter tested and aging testing. Baudcom′s excellent quality is ensured by the implementation of a million dollars′ worth of professional testing equipments, as well as the testing procedures which strictly follows international standards for quality control.
Baudcom′s products has exported to more than 20 countries, such as India, Indonesia, Vietnam, Thailand, Ecuador, Libya, Malaysia, Philipine and other countries. they are widely accepted by our customers.
We would have the pleasure to establish business relationship with you, or as a agent or distributor, reseller for our company, also we could like to cooperate by the way of OEM. Our company is committed to the aim of accelerating the development of technology and creating value for our consumers. We, together with our partners would like to expand a new horizon for the data communication industry through consistent technical development, cost reduction, and comprehensive post-sale service. We provide advanced and reliable solutions to the highest standards.
Baudcom products include 10/100M Managed Media Converter, 10/100/1000M Managed Media Converter, 4E1/8E1/16E1 PDH fiber optical Multiplexer, Telephone/Video/Data fiber multiplexer, Digital Vedio audio optical multiplexer, 4/8/16/32channel voice optical multiplexer, E1/V35/RS232 Fiber modems, voic10/100M+V. 35/4E1/RS232/FXO(S) integrated optical transimission multiplexer, 1E1/4E1/8E1 to Ethernet protocol converter, V. 35 to 10/100M converter, E1/V35/Ethernet G. SHDSL modem, TDM over IP, 8/16 channels CWDM platform, SFP modules, SFF transceiver, 1x9 transceiver and so on.
Our company have passed the verification of ISO9001: 2000 and gained the network connection certificate for telecommunication devices issued by the Ministry of Information Industry. All of the Baudcom′s products are strictly parameter tested and aging testing. Baudcom′s excellent quality is ensured by the implementation of a million dollars′ worth of professional testing equipments, as well as the testing procedures which strictly follows international standards for quality control.
Baudcom′s products has exported to more than 20 countries, such as India, Indonesia, Vietnam, Thailand, Ecuador, Libya, Malaysia, Philipine and other countries. they are widely accepted by our customers.
We would have the pleasure to establish business relationship with you, or as a agent or distributor, reseller for our company, also we could like to cooperate by the way of OEM. Our company is committed to the aim of accelerating the development of technology and creating value for our consumers. We, together with our partners would like to expand a new horizon for the data communication industry through consistent technical development, cost reduction, and comprehensive post-sale service. We provide advanced and reliable solutions to the highest standards.
){kind=link}